唐山天物彩板有限公司

天物彩板 · 专注定制彩板16年
资讯详情
河南焦作印花彩钢板对用户使用条件的要求

印花彩钢板对用户使用条件的要求

天物彩板专注彩板行业16年——关于更多彩钢板新闻请拨打网站上方电话咨询

印花彩钢板建筑行业使用颇为广泛,其使用方便,花色众多,耐腐性好等优势,在使用的时候有一些需要用户注意的地方,只有满足一些使用条件要求,才可以使得板材更好的发挥使用性能,下面就来给大家介绍一下。

1、在碱性介质条件下慎用印花彩钢板;
2、湿的木材和混凝土也不要长时间接触彩钢板;
3、避免其他未保护的导电体直接接触彩钢板;
4、屋顶如坡度小建议采用彩钢板;
5、对配套件(绝缘、密封和紧固件)的使用要同步考虑其耐蚀性;
所以大家在使用印花彩钢板过程中应满足以上几个要求。这样才可以保证板材能够不受外界因素的影响,保证其使用效果,大家在实际的应用中要注意对周边环境的把控,避免影响板材正常使用的因素出现,这样有利于大家的正常施工。

Printing color steel plate is widely used in the construction industry. It is convenient to use, many colors, good corrosion resistance and other advantages. When using, there are some points that need to be paid attention to by users. Only by meeting the requirements of some use conditions can the plate have better performance. The following will introduce it to you.

1. Printing color steel plate should be used cautiously in alkaline medium;
2. Wet wood and concrete should not contact with color steel plate for a long time;
3. Avoid other unprotected conductors from directly contacting the color steel plate;
4. If the roof slope is small, color steel plate is recommended;
5. The corrosion resistance should be considered in the use of matching kits (insulation, sealing and fasteners);
The above several color printing process should meet your requirements. Only in this way can we ensure that the plate can not be affected by external factors, and ensure its use effect. We should pay attention to the control of the surrounding environment in the actual application, so as to avoid the occurrence of factors affecting the normal use of the plate, which is conducive to the normal construction of everyone.
返回列表
上一篇
下一篇