唐山天物彩板有限公司

天物彩板 · 专注定制彩板16年
资讯详情
花纹彩涂铝板的搬运及储存有什么要求

花纹彩涂铝板的搬运及储存有什么要求

花纹彩涂铝板是金属量非常大的一种,很多用户和经销商都会储备一些现货,随时可以使用,方便客户随时提货。花纹铝板是一种具有活性的金属。如果存放不当,会发生变形、变色、腐蚀等事故,影响正常使用。


镀锌花纹板 (2)

花纹彩涂铝板搬运:搬运时注意棱角保护,花纹铝板斜放。花纹彩涂铝板倾斜角度不得超过10度,地面应垫木或厚胶合板。搬运时,两端应同时起吊,不要推拉,以免损坏表面氧化膜或涂层。工作面应平整,无硬物,不得损伤花纹铝板表面。理想的地方停车的图案铝板是在一个平坦的网站。在运输过程中应面对面堆放。禁止一人携带。在运输过程中要小心轻放。应严格防止碰撞造成的表面损伤,板体弯曲过度应划伤板表面。
花纹铝板的存放:在运输和存放过程中,应注意花纹铝板(板)等铝材的存放。首先,要用篷布将床单遮盖起来,防止运输过程中雨雪侵袭。其次,铝的储存环境应干燥、明亮、通风良好、无腐蚀性。同时,要防止雨、水、雪进入仓库。储存铝时,严禁与化学材料和湿材料一起储存。
中国幅员辽阔,温差明显。用户拿到图案铝板后,千万不要急于打开包装。先将花纹铝板放在通风良好的地方放置3天,以平衡花纹铝板内外温差,然后打开包装使用。这样可以保证花纹铝板不会因温差过大而产生水汽,保证花纹铝板的质量合格。

Patterned aluminum plate is a very large amount of metal, many users and dealers will store some in stock, ready to use at any time, convenient for customers to pick up at any time. The patterned aluminum plate is a kind of metal with active properties. If it is not stored properly, there will be deformation, discoloration, corrosion and other accidents, which will affect the normal use.

Handling of patterned aluminum plate: during handling, pay attention to the protection of edges and corners, and place the patterned aluminum plate obliquely. The inclination angle shall not exceed 10 degrees, and the floor shall be padded with wood or thick plywood. When handling, both ends should be lifted at the same time, do not push or pull, so as not to damage the surface oxide film or coating. The working surface shall be flat without hard objects and shall not damage the surface of patterned aluminum plate. The ideal place to park the patterned aluminum plate is in a flat site. It should be stacked face to face in the process of transportation. It is forbidden to carry it by one person. It should be handled with care in the process of transportation. The surface damage caused by collision should be strictly prevented, and the surface of the plate should be scratched due to excessive bending of the plate body.
Storage of patterned aluminum plate: during transportation and storage, attention should be paid to patterned aluminum plate (plate) and other aluminum materials. First of all, it is necessary to cover the sheets with tarpaulin to prevent the invasion of rain and snow during transportation. Secondly, the aluminum storage environment should be dry, bright, well ventilated and non corrosive. At the same time, rain, water and snow should be prevented from entering the warehouse. When storing aluminum, it is strictly forbidden to store it together with chemical materials and wet materials.

China has a vast territory, and the temperature difference is obvious. After users get the patterned aluminum plate, they must not rush to open the package. First, put the patterned aluminum plate in a well ventilated place for 3 days to balance the temperature difference between the inside and outside of the patterned aluminum plate, and then open the package for use. This can ensure that the patterned aluminum plate will not generate water vapor due to too large temperature difference, and ensure the quality of patterned aluminum plate is qualified.


返回列表
上一篇
下一篇