唐山天物彩板有限公司

天物彩板 · 专注定制彩板16年
资讯详情
抗暴板的保温隔热性能

抗暴板的保温隔热性能

天物彩板专注彩板16年——更多保温防火彩钢板厂家_保温彩钢板价格_天物粉末喷涂彩板请拨打网站上方电话咨询

保温防火彩钢板厂家_保温彩钢板价格_天物粉末喷涂彩板

保温层选用防爆板,并与其他材料相结合,形成保温层。基本达到国家消防标准a,从根本上消除了外保温火灾的可能性。使用温度范围为-250℃~+150℃。
保温节能功能突出。防爆板具有优异的保温隔热功能,导热系数约为0.023w/(M?这远远低于市场上常用的无机和有机外墙保温产品,可以实现更高的节能效果。重量轻,不吸水,防爆板重量轻,一般为30-80kg/m3。同时,防爆压板不吸水,不怕下雨。安全环保是环保绿色产品,不会刺激皮肤或对人体造成任何伤害。在焚烧过程中,会释放出无毒的烟雾(因为防爆浮力板主要由C.H.O三元素组成)。
良好的鳞片稳定性具有很好的鳞片稳定性,无论在什么环境下,都不会出现缩松、变形等情况。
它不仅可广泛应用于外墙保温系统的施工,还可广泛应用于活动室、净化车间、冷库彩钢夹芯板、空调风管、管道保温、幕墙保温、屋面保温、机房机柜保温等,设备保温、碳晶电热板保温等需要保温的区域。
自20世纪90年代以来,反风暴面板数据得到了极大的发展。它首先被英美军方重视,应用于航空航天、国防和军工等领域,然后被用于规模使用。本产品符合住房和卫生部《办公建筑和民用建筑外保温系统防火暂行规定》的要求。适用于新建多层、中高层建筑的节能施工和旧房屋的节能改造。幕墙和非幕墙施工可节约能源。
防火屏障。外墙保温装饰板。
高阻燃,氧指数54%。不吸水,24小时内不超过3%。透气保温层,延长墙体使用寿命。保温性能好,导热系数低,0.02-0.029,节能50%-65%。稳定,耐候习惯外墙,不收缩,不翼,不开裂。重量轻,无毒无味,绿色环保。标准、厚度、密度符合规划要求。
内外墙保温施工方法一般采用砂浆粘结法或钉粘结法。一。自下而上,从支撑部位开始,用高分子粘裂砂浆,将防爆板贴在墙上。结合面积大于35%,第一层大于50%。外保护层较厚时,每平方米钉4-6根绝缘钉。2。保护层施工应在粘结后24小时内停止。三。外部施工每24小时进行一次。四。保温板的厚度和密度应符合规划要求。黄河以北一般不小于4cm,密度50kg/m3。寒冷地区应加厚。
复合保温装饰板是集保温、装饰于一体的建筑材料。工厂生产。防爆板应与装饰板粘结牢固。选用轻钢龙骨施工方案,龙骨上挂复合保温装饰板固定。一定要处理好板与板之间的间隙,以免漏水。

The anti explosion plate is selected for the insulation layer, which is combined with other materials to build the insulation layer. It can basically reach the national fire protection standard a, and fundamentally eliminate the possibility of external insulation fire. The use temperature scale is - 250 ℃ ~ + 150 ℃.

Te function of heat preservation and energy conservation is outstanding. The anti explosion plate has outstanding heat preservation and insulation function, and its thermal conductivity is about 0.023w / (M? K), which is far lower than the inorganic and organic external wall heat preservation products commonly used in the market, and can achieve higher energy conservation. Light weight, no water absorption, light weight of anti explosion plate, and the unit weight is generally 30-80kg / m3. At the same time, the explosion-proof pressure plate does not absorb water and is not afraid of rain. Safety and environmental protection are environmental protection and green products, which will not stimulate the skin or cause any harm to the human body. During incineration, non-toxic smoke will be released (because the explosion-proof relief plate is mainly composed of c.h.o three elements).
Good scale stability has very good scale stability, no matter in what environment, there will be no shortening, deformation and other conditions.
It can be widely used not only in the construction of external wall thermal insulation system, but also in the activities room, purification workshop, cold storage color steel sandwich panel, air conditioning duct, pipeline thermal insulation, curtain wall thermal insulation, roof thermal insulation, machine room cabinet thermal insulation, equipment thermal insulation, carbon crystal electric heating board thermal insulation and other areas requiring thermal insulation.
Since the 1990s, the anti storm panel data has been greatly developed. It was first valued by the British and American military, used in the fields of aerospace, national defense and military industry, and then used in the scale of use. This product has met the requirements of the Interim Provisions on fire protection of the external insulation system of office buildings and civil buildings of the Ministry of housing and health. It is applicable to the energy-saving construction of new multi-layer and middle high-rise buildings and the energy-saving transformation of old houses. Curtain wall and non curtain wall construction can save energy.
Fire barriers. External wall heat preservation and decoration board.
High flame retardant, 54% oxygen index. No water absorption, no more than 3% in 24 hours. Breathable insulation layer, extending the life of the wall. Good heat preservation, low thermal conductivity, 0.02-0.029, energy saving up to 50% - 65%. Stability, weather resistance habit external wall, not shrink, not wing, not crack. Light weight, non-toxic and tasteless, green and environmental protection. The standard, thickness and density meet the planning requirements.
The construction method of internal and external wall insulation generally adopts mortar bonding method or nail bonding method. 1. From the bottom to the top, start from the supporting part, use the polymer adhesive crack mortar, and paste the anti explosion plate on the wall. The bonding area shall be greater than 35% and the first layer shall be greater than 50%. If the outer protective layer is heavy, 4-6 insulation nails shall be nailed per square meter. 2. The protective layer construction shall be stopped for 24 hours after bonding. 3. The external construction can be carried out every 24 hours. 4. The thickness and density of the insulation board shall meet the planning requirements. Generally, it shall not be less than 4cm in the north of the Yellow River, with a density of 50kg / m3. It shall be thickened in the cold area.
Composite heat preservation and decoration board is integrated in the construction of heat preservation and decoration. Factory production. The explosion relief plate shall be firmly bonded to the decoration panel. The light steel keel construction plan shall be selected, and the composite heat preservation and decoration board shall be hung on the keel and fixed. Make sure to deal with the gap between the plates to avoid water leakage.
Non transparent curtain wall can be bonded on the inner panel of curtain wall or fixed on the wall. Form a closed space with the curtain wall panel.
For the fire-proof isolation belt, the method of binding nails shall be selected according to the spacing required by the planning, which shall not be less than 30 cm.
Civil aircrafts, ships and A-class fire-proof and anti explosion plates belong to the thermosetting foaming heat preservation data, which are not burned, shortened, deformed, dripping or flame transmissible in case of fire. Its fire-resistant grade is high and its fire-proof function is good. Burning with open fire can only form a layer of carbonized layer on its surface, without burning or deformation.
Compared with the commonly used external thermal insulation data, the big advantages are that it is difficult to burn, stable in scale under high temperature, not shortened, no melting drop, and strong in flame penetration resistance. It can be made into external wall heat preservation board, pipe shell and various special products, with the characteristics of light weight and convenient construction.
返回列表
上一篇
下一篇