唐山天物彩板有限公司

天物彩板 · 专注定制彩板16年
资讯详情
铝镁锰彩钢板的优点

铝镁锰彩钢板的优点

一。铝镁锰彩钢板优良的防雷特性
铝镁锰合金本身是一种良好的导体,其结构完整性容易形成导体合金表面,可随时接受雷电的强电流。然后将雷电通过屋顶和地面排水装置引出屋顶,以保证屋顶的安全。
2。有效的防护措施
铝镁锰彩钢板高强度铝合金专用夹具,用于防台风易发区,防止屋顶被台风掀翻;在雪地区,防止整个屋顶区域滑动。通过自动控制
伴热融雪系统促进了屋顶、檐沟和落水管上的雪的安全融化。
三。适用于度假村、高档酒店、俱乐部、展览馆、住宅等公共建筑和民用建筑的屋顶;
四。 铝镁锰彩钢板结构简单、轻便、安全、光滑美观;
5个。有25mm、32mm、65mm等供设计人员自由选择,损耗小,系统荷载小,结构稳定性高;
6。它能满足建筑师和建筑对弧形、球面、三维弧形等特殊几何形状屋顶的要求。
7号。 铝镁锰彩钢板金属屋面系统采用固定扣件和滑动扣件相结合的方式,吸收热膨胀和收缩引起的位移,防止板的变形、漏雨和断裂。
油漆产品:
按涂装工艺:喷板产品和预滚涂板;
按油漆种类可分为聚酯、聚氨酯、聚酰胺、改性有机硅、环氧树脂、氟碳等,
尽量延长涂料的耐紫外线老化性能,其中PVDF涂料(氟碳涂料)具有最佳的抗老化性能。
它是人类已知的最抗紫外线的有机化合物。根据不同的质量要求,氟碳涂层铝板采用水平自动化
二道、二道、三道、三道、四道、四道烘烤辊涂工艺。预涂PVDF涂料的树脂含量在70%~80%之间,用于高速连续机组
采用化学预处理、初涂、精涂的方法制成辊涂。前涂层一般为25μm,后涂层为防腐漆。

Advantages of aluminum magnesium manganese tile

1. Excellent lightning protection characteristics
Aluminum magnesium manganese alloy itself is a good conductor, and its structural integrity is easy to form a conductor alloy surface, which can receive strong current from lightning at any time. Then the lightning is led out of the roof through the roof and ground drainage device, so as to ensure the safety of the roof.
2. Effective protective measures
High strength aluminum alloy special clamps are used in typhoon prone areas to prevent the roof from being overturned by typhoon, and in snowy areas to prevent the whole roof area from sliding. Through automatic control
The heat tracing snow melting system promotes the safe melting of snow on roofs, eaves gutters and downpipes.
3. It is applicable to the roofs of public buildings and civil buildings such as resorts, high-end hotels, clubs, exhibition halls, residences, etc;
4. The structure is simple, light, safe, smooth and beautiful;
5. There are 25mm, 32mm, 65mm and so on for the designer to choose freely, the loss is small, the system load is small, the structure stability is high;
6. It can meet the requirements of architects and buildings for special geometric shape roofs such as arc, spherical and three-dimensional arc surfaces.
7. The metal roof system adopts the combination of fixed fastener and sliding fastener to absorb the displacement caused by thermal expansion and contraction, and prevent the deformation, rain leakage and fracture of the plate.
Painting products:
According to the coating process: spray plate products and pre roll coating plate;
It can be divided into polyester, polyurethane, polyamide, modified silicone, epoxy resin, fluorocarbon, etc. according to the type of paint,
As far as possible to extend the paint resistance against ultraviolet light aging, in which PVDF coating (fluorocarbon coating) has the best anti-aging performance.
It is the most UV resistant organic compound known to man. According to different quality requirements, horizontal automation is adopted for fluorocarbon coated aluminum plate
Two coat, two bake, three coat, three bake and four coat, four bake roll coating process. The resin content of the precoated PVDF coating varies from 70% to 80%, which is applied in the high-speed continuous unit
It is made of oller coating by chemical pretreatment, initial coating and fine coating. The front coating is generally 25 μ m, and the back coating is anti-corrosion paint.
返回列表
下一篇