唐山天物彩板有限公司

天物彩板 · 专注定制彩板16年
资讯详情
浅析制作彩钢卷的工艺性能

浅析制作彩钢卷的工艺性能

准备水箱时,先添加钝化剂,然后排水。由于钝化剂的相对密度比较困难,当钝化剂的相对密度高于水时,会导致原材料混合不均匀,钝化处理层与基体结合不良,彩钢板卷表面油漆爆炸。

439D3F9C7A559B06A7ADF4F3B782B472
钝化处理板温度的生产工艺流程也有要求,即员工在检查时没有定期跟踪钝化处理板温度。特别是在冬季,温度变化也比较大,最终会导致 彩钢卷老化,成型时会出现划伤和油漆剥落的问题。
彩钢卷生产制造的全过程中,出口值检验镜上有灰尘,部分辊子上也有灰尘。粉尘会立即危及彩钢卷的工艺性能。它可能无法在一开始就显示出来,但如果它需要很长时间或暴露在太多的阳光下,油漆会爆炸。
由于 彩钢卷油漆爆炸的问题,我坚信你至少要从网络编辑的学生那里获得专业知识。另一方面,目前销售市场上彩钢卷的原材料一般为冷轧板、热镀锌板、磷化处理板和热镀锌板。另外,这就是这个

Add passivator first and then drain water when preparing the tank. Because the relative density of passivator is difficult, when the relative density of passivator is higher than water, it will lead to uneven mixing of raw materials, poor adhesion between passivation treatment layer and substrate, and paint explosion on the surface of color steel coil.

There are also requirements for the production process flow of passivation treatment plate temperature, which is to say that the staff did not track the passivation treatment plate temperature regularly at the time of inspection. Especially in winter, the temperature change is also relatively large, which will eventually lead to the aging of color steel coil, and the problem of scratch and paint peeling will occur at the time of molding.
In the whole process of production and manufacturing of color steel coil, there is dust on the export value inspection mirror, and also on some rollers. The dust will immediately endanger the process performance of color steel coil. It may not be able to show at the beginning, but if it takes a long time or is exposed to too much sun, the paint will explode.
Because of the problem of paint explosion of color steel coil, I firmly believe that you must get at least professional knowledge from the students of network editing. On the other hand, generally speaking, the raw materials used for color steel coil in the current sales market are cold rolled plate, hot-dip galvanized plate, phosphating treated plate and hot-dip galvanized plate. In addition, this is this
返回列表
上一篇
下一篇