唐山天物彩板有限公司

天物彩板 · 专注定制彩板16年
资讯详情
认识氟碳喷涂与粉末喷涂的差别

认识氟碳喷涂与粉末喷涂的差别

天物新产品,粉末喷涂彩板——超高膜厚,超高致密 ,涂层饱满,能有效抵御腐蚀因子的入侵,对基板起到很好的保护作用。

如何理解氟碳喷涂和粉末喷涂?当很多客户咨询我们时,我们发现很多客户对粉末喷涂和氟碳喷涂的区别感到困惑,他们的性能和特点是什么?带你去了解他们之间的区别。

粉末喷涂加工与氟碳喷涂加工在表面上非常相似,但也有许多不同之处,简要总结如下:

一、性能:与 粉末喷涂相比,氟碳喷涂具有耐磨、耐候、抗紫外线、色牢度等优点。其中大部分在室外喷氟碳,大部分在室内喷粉末。

二。价格:氟碳喷涂价格比 粉末喷涂彩板高出数倍。

三。实际用途:根据幕墙设计、施工单位,特别是近5年的使用情况,以及铝材厂的销售情况,幕墙铝材表面及室外型材基本选用氟碳喷涂,而室内型材大多采用 粉末喷涂,而隐蔽部分也采用阳极氧化处理。近几年来,型材基本上都是粉末喷涂,但近年来,随着散热型材的大量使用,高端市场正在兴起,现在氟碳喷涂铝也得到了广泛的应用。除了少数别墅和政府项目使用氟碳喷涂外,其他用途都是粉末喷涂。

四。室外用铝型材,包括幕墙压板、节点板、装饰板、外墙铝单板、外墙铝格栅、阳台穿孔铝板等,均应采用氟碳喷涂处理,否则易产生变色和表面裂纹,特别是在风雨交加、日晒雨淋、风压大、紫外线强的地区,需要进行高质量的表面处理;对于非室外幕墙型材,如幕墙柱、梁等,建议采用粉末涂料。对于窗型材,考虑到建筑效果、建筑位置、造价、施工、使用功能和耐久性等因素,建议将隔热型材室外部分确定为氟碳喷涂,将隔热型材室内部分确定为粉末喷涂。

How to understand fluorocarbon spray and powder spray? When many customers consulted us, we found that many customers were confused about the differences between powder spraying and fluorocarbon spraying, and what are their properties and characteristics? Take you to know the difference between them.


Powder spray processing and fluorocarbon spray processing are very similar on the surface, but there are also many differences briefly summarized as follows:

I. performance: compared with powder spraying, fluorocarbon spraying has many advantages, such as wear resistance, weather resistance, UV resistance and color fastness. Most of them are sprayed with fluorocarbon outdoors and most of them are sprayed with powder indoors.

2. Price: the price of fluorocarbon spraying is several times higher than that of powder spraying.

III. actual use: according to the curtain wall design and construction unit, especially the use in recent 5 years, as well as the sales situation of the aluminum material factory, the surface of the curtain wall aluminum material and the outdoor profile will basically choose fluorocarbon spraying, while the indoor profile is mostly powder spraying, while the concealed parts are also anodized. In the past few years, the profile is basically powder spraying, but in recent years, with the large use of heat breaking profile, the high-end market is rising, now the fluorocarbon spraying aluminum is also widely used. In addition to a small number of villas and government projects using fluorocarbon spraying, all other uses are powder spraying.

IV. aluminum profiles for outdoor use, including curtain wall pressing plate, gusset plate, decorative plate, outer wall aluminum single plate, outer wall aluminum grid, balcony perforated aluminum plate, etc., shall be treated by fluorocarbon spraying, otherwise, discoloration and surface cracks are likely to occur, especially in areas with frequent wind and rain, sun and rain, high wind pressure and strong ultraviolet rays, which need high-quality surface treatment; for non outdoor curtain wall profiles For example, curtain wall column and beam, powder coating is recommended. For the window profile, considering the building effect, building location, cost, construction, use function and durability, it is suggested that the outdoor part of the thermal cutoff profile should be determined as fluorocarbon spraying, and the indoor part of the thermal cutoff profile should be determined as powder spraying.
返回列表
上一篇
下一篇