彩涂板的储存和运输指南

专业的彩板服务，一站式体系天物彩板为您解决买彩板的烦恼——更多天津彩涂板运输配送_彩涂板储存方法请拨打网站上方电话咨询

彩涂板的储存、运输和搬运是影响彩涂板质量的重要环节。由于操作不当，在储存、运输和搬运过程中，可能会出现划痕、压花、腐蚀等各种缺陷。为了尽可能减少和避免各种缺陷的发生，下面给出一些操作中的注意事项。有关储存、运输和搬运的具体规定，请参阅相关资料或咨询专家。

产品应存放在干燥通风的室内环境中，避免露天存放，并存放在冷凝和温差变化较大的地方。产品应送至干净整洁的环境中，避免各种腐蚀性介质的腐蚀。储存场所地面应平整，无硬物，并有足够的承载力。水平钢卷应放置在橡胶垫、垫木、支架等装载设备上，带锁应向上，不得直接放在地面或运输工具上。
为了避免压碎，钢卷一般不堆放。钢板堆码时，应严格限制堆码层数，并将钢板包装的重量和比例放在下面。彩涂板的机械性能和一些涂层功能，如铅笔硬度、t弯值和冲击能值，可能会随着储存时间的延长而改变，建议用户尽快加工。储存区应留有足够的空间供起重设备使用。
钢板和钢卷的存放位置应合理组织，便于进出，尽量减少不必要的移动。按交货条件交货，不得随意打开原包装。装卸时在吊具与产品之间加橡胶垫，防止碰撞，有条件时使用专用吊具。运输车辆车厢应清洁，车厢底板应铺橡胶垫或其他防护用品，车厢周围应采取必要的防护措施，防止包装上出现压痕或碰伤。
垂直包装的钢卷在运输和装卸时也应垂直。产品应固定牢固，避免在运输过程中因相对移动或滚动而造成产品损坏或事故。当钢板取出时，为避免烫伤过程中的毛发攻击和烫伤下对钢板的影响，不能推迟。钢板搬运时应轻拿轻放，不要碰其他硬物。

The storage, transportation and handling of color coated plates are important links affecting the quality of color coated plates. Because of improper operation, there may be various defects such as scratch, embossing and corrosion in the process of storage, transportation and handling. In order to reduce and avoid the occurrence of various defects as much as possible, some precautions in operation are given below. For specific regulations on storage, transportation and handling, please refer to relevant materials or consult with experts.

The product should be stored in a dry and ventilated indoor environment to avoid outdoor storage and in places where condensation and temperature difference are likely to change greatly. Products should be sent to a clean and tidy environment to avoid the corrosion of various corrosive media. The ground of the storage place shall be flat, free of hard objects and with sufficient bearing capacity. The horizontal steel coil shall be placed on the rubber pad, pad wood, bracket and other loading equipment, and the strap lock shall be upward, not directly on the ground or on the transport tool.
In order to avoid crushing, steel coils are generally not stacked. When stacking steel plates, the number of stacking layers shall be strictly restricted, and the weight and scale of the plate package shall be placed below. The mechanical function and some coating functions of the color coated plate, such as pencil hardness, T-bend value and impact energy value, may change with the extension of the storage time, so it is suggested that the user should process as soon as possible. Sufficient space shall be reserved in the storage area for the use of hoisting equipment.
The storage position of steel plate and coil shall be reasonably organized to facilitate access and reduce unnecessary movement as much as possible. The products shall be delivered according to the conditions of delivery, and the original packaging shall not be opened at will. During loading and unloading, a rubber pad shall be added between the spreader and the product to avoid collision, and special spreader shall be used when conditions permit. The carriage of the transport vehicle shall be cleaned, the bottom plate of the carriage shall be paved with rubber pad or other protective equipment, and necessary protective measures shall be adopted around the carriage to avoid the occurrence of indentation or bruise on the package.
The steel coil of vertical packaging shall also be vertical during transportation and loading and unloading. The product shall be fixed firmly to avoid product damage or accident caused by relative movement or rolling during transportation. When the steel plate is taken out, it can't be postponed to avoid the hair attack during the blocking and the blocking affecting the steel plate under the injury. The steel plate should be handled with care, and do not touch other hard objects.