联系我们收藏本站在线留言网站地图欢迎进入唐山天物彩板有限公司官网!

彩板厂家_彩涂板价格_彩涂卷厂家_彩涂板价格_唐山彩涂板厂家

天物彩板-始于2004 专注功能性高端彩板生产销售
服务热线: 400-060-9166
服务热线: 13931586578
彩板厂家

不燃彩钢板应用

返回列表 来源: 发布日期: 2020.04.14

不燃彩钢板应用

天物彩板专注彩板行业16年——新宇彩钢板与蓝天彩钢板那个好请拨打网站上方电话咨询

随着我国经济的不断发展,特别是近年来,电子、生物、医药等高新技术产业的快速增长,洁净室在各个行业得到了广泛的应用。洁净室的主体结构彩钢夹芯板,仍然是不可替代的产品。然而,洁净室彩钢板的防火等级越来越受到政府有关部门和各行业的重视。

新宇彩钢板与蓝天彩钢板那个好_天物彩涂卷
根据国家新标准《洁净厂房设计规范》GB50073-2001,洁净室吊顶、墙板(含夹芯材料)采用不燃材料,不得采用有机复合材料。吊顶耐火极限不小于0.4h,疏散走道吊顶不小于1.0h,隔墙及相应吊顶不小于1.0h,随着新标准的实施,对洁净室彩钢板提出了更高的要求。哪些有机、有毒、防火性能差的夹层材料将被淘汰。
但是,为了减少项目投资,一些企业仍然使用国家明令禁止使用的有机夹层材料,如聚苯乙烯、聚氨酯等。从眼前来看,虽然减少了投资,但增加了你的风险。你想过你工厂的消防安全吗?你的工人在这种环境下安全吗?一旦发生火灾,你将付出更高的代价,而血悲剧的教训应该吸取。洁净室在本质上不同于其他车间。这是一个相对密闭的车间。一旦发生火灾,夹芯材料中的有毒气体不易清除,直接威胁人类健康。我们呼吁您在建造洁净室之前考虑“安全第一”的因素。
根据洁净室彩钢板的防火要求,研制生产了不燃彩钢板夹芯板和彩钢板石膏防火板。它是以无机绿色建筑材料为主体,通过特殊的生产工艺和科学的安装接缝而形成的一种新型洁净室墙体材料。经国家消防设备质量监督检验中心检测,完全符合《洁净厂房设计规范》GB50073-2001的防火要求,各项指标均达到或超过国家标准。同时,通过几个工程实例的应用,得到了相关专家的肯定和推广。是目前洁净室彩钢板最理想的替代产品。
彩钢石膏防火板(组合式),壁厚75mm,耐火极限1.4h,适用于由彩钢石膏板、加强龙骨、岩棉组成的隔墙系统。安装拆卸方便,不影响主体结构,可根据不同耐火等级选择不同厚度的隔墙,完全满足防火设计要求。
无机不燃彩钢夹芯板,壁厚50mm,耐火极限1.2h,由彩钢板、无机不燃板、岩棉、型材组成。与普通岩棉板相比,具有表面平整度好、抗压强度高、耐火等级高等优点。特别适用于洁净厂房的隔断和吊顶,解决了洁净厂房吊顶的一大难题。人们不仅可以在上面行走,还可以根据工艺布置随意开孔。

With the continuous development of China's economy, especially in recent years, the rapid growth of high-tech industries such as electronics, biology, medicine, etc., clean rooms are widely used in various industries. The main structure of the clean room, the color steel sandwich panel, is still an irreplaceable product. However, the fire rating of color steel plate in clean room has attracted more and more attention of relevant government departments and various industries.

According to the new national standard GB50073-2001 code for design of clean workshop, the ceiling and wall panel (including sandwich material) of clean room shall be non combustible and organic composite materials shall not be used. The fire resistance of ceiling shall not be less than 0.4h, that of evacuation walkway ceiling shall not be less than 1.0h, and that of partition wall and its corresponding ceiling shall not be less than 1.0h. With the implementation of the new standard, higher requirements are put forward for the clean room color steel plate. Which kind of organic, toxic and poor fireproof sandwich material will be eliminated.
However, in order to reduce project investment, some enterprises still use organic sandwich materials banned by the state, such as polystyrene, polyurethane and so on. From the immediate point of view, while reducing investment, but increased your risk. Have you ever thought about the fire safety of your factory? Are your workers safe in this environment? In case of a fire, you will pay a higher price, and the lesson of blood tragedy should be learned. Clean room is different from other workshops in essence. It is a workshop with relatively airtight air. Once a fire occurs, the toxic gas of sandwich material is not easy to be removed, which directly threatens human health. We call on you to consider the element of "safety first" before you build clean rooms.
According to the fire protection requirements of color steel plate in clean room, the non combustible color steel sandwich board and color steel gypsum fire board are developed and produced. It is a new clean room wall material with inorganic green building materials as the main body, through special production process and scientific installation joints. According to the test of national fire equipment quality supervision and inspection center, it fully meets the fire protection requirements of GB50073-2001 code for design of clean workshop, and all the instructions meet or exceed the national standards. At the same time, through the application of several engineering examples, it has been affirmed and promoted by relevant experts. It is the most ideal alternative product of clean room color steel plate at present.
Color steel gypsum fire-proof board (assembled type), with wall thickness of 75mm and fire resistance limit of 1.4h. It is suitable for partition system, which is composed of color steel gypsum board, reinforced keel and rock wool. It is easy to install and disassemble, and does not affect the main structure, and can select different thickness of partition wall according to different fire resistance rating to fully meet the fire design requirements.
Inorganic nonflammable color steel sandwich board, with wall thickness of 50mm and fire resistance limit of 1.2h. It is composed of color steel plate, inorganic non combustible plate, rock wool and profile. Compared with general rock wool plate, it has the advantages of good surface flatness, good compressive strength and high fire resistance rating. It is especially suitable for partition and ceiling of clean workshop, which solves a big problem of ceiling of clean workshop. Not only can people walk on it, but also can open holes at will according to process layout.
【相关推荐】

咨询热线

400-060-9166