Color coated plate, also known as color steel plate, color steel coil. Color coated steel plate is a product made of cold-rolled steel plate and galvanized steel plate as base plate, after surface pretreatment (degreasing, cleaning, chemical conversion
treatment), coating by continuous method (roll coating method), baking and cooling. Coated steel plate has light weight, beautiful appearance and good anti-corrosion performance, but also can be directly processed. It provides a new type of raw material
for the construction industry, shipbuilding industry, vehicle manufacturing industry, home appliance industry, electrical industry and so on. It has played a good effect of replacing wood with steel, efficient construction, energy saving, pollution
prevention and so on. Mainly used in the following industries.
1. When fixed with nails, the distance between nails shall not be more than 150 mm, and the splicing of color steel coil shall be neat, vertical, gray, deformed, stained, etc.
The commodity should be placed in the dry and naturally ventilated indoor air to prevent it from being placed outdoors and in the place where the condensation water and temperature difference are easy to change. Products should be placed in a clean and
neat natural environment to prevent the erosion of various corrosive media. The soil in the storage site shall be leveled, free of hard blocks and with consideration of load capacity. The vertical coil steel shall be placed on the rubber pad, pad
wood, fixed support and other equipment, and the belt buckle lock shall face upward, and it is not allowed to be placed on the soil or special transportation tools immediately.
Whether the installation of color steel coil is simple or not will immediately endanger the actual effect of its decoration design. Therefore, the installation of the decorative building materials is the most important thing for people to grasp. The installation
of color steel coil must comply with the necessary processing technology regulations. The key processing technology regulations are as follows:
Color steel rolling plate has the advantages of avoiding fading, weather resistance, anti delamination, etc., so it is an attractive substitute for wood and other raw materials. When purchasing, people often make it difficult to make a choice due to problems
such as thin and thick coating, color deviation, glossiness, strength, adhesion, etc. Let's understand the performance of the coating of the lower color steel coil.