Hot dip aluminum zinc color coated plate
According to the requirements, hot-dip aluminum zinc steel plate can also be used as the color coating substrate (55% AI Zn and 5% AI Zn).
Color coated sheet
Electro galvanized color coated plate
The galvanized sheet is used as the base plate, and the product baked with organic coating is galvanized color coated sheet. Due to the thin zinc layer of the galvanized sheet, the zinc content is usually 20 / 20g / m2, so the product is not suitable
for outdoor wall, roof, etc. But because of its beautiful appearance and excellent processing performance, it can be mainly used in home appliances, acoustics, steel furniture, interior decoration, etc.
Cold rolled steel plate with color coating
The color plate produced by the cold-rolled substrate has a smooth and beautiful appearance, and has the processing performance of the cold-rolled plate; however, any small scratch on the surface coating will expose the cold-rolled substrate to the air,
so that the exposed iron will quickly generate red rust. Therefore, such products can only be used for temporary isolation measures and indoor materials with low requirements.
Hot dip galvanized color coated steel plate
The product obtained by coating the organic coating on the hot-dip galvanized steel plate is the hot-dip galvanized color coating plate. In addition to the protection of zinc, the organic coating on the surface of the hot-dip galvanized color coated plate
also plays the role of insulation protection and rust prevention. Its service life is longer than that of the hot-dip galvanized plate. The zinc content of hot-dip galvanized base plate is generally 180g / m2 (both sides), and the maximum zinc content
of hot-dip galvanized base plate for external use of buildings is 275g / m2.