联系我们收藏本站在线留言网站地图欢迎进入唐山天物彩板有限公司官网!

彩板厂家_彩涂板价格_彩涂卷厂家_彩涂板价格_唐山彩涂板厂家

天物彩板-始于2004 专注功能性高端彩板生产销售
服务热线: 400-060-9166
服务热线: 13931586578
彩板厂家

如何清除彩涂镀锌板上的不干胶

返回列表 来源: 发布日期: 2020.02.20

如何清除彩涂镀锌板上的不干胶

天物彩板专注彩板16年——更多河北彩涂镀锌板价格表_ hpc彩涂_天物彩钢板价格请拨打网站上方电话咨询

彩钢板价格厂家彩涂镀锌板在施工过程中操作不当,容易沾上粘合剂,这是由于工人的粗心大意造成的。一是不美观,二是影响正常的附着力,所以需要一些方法来去除,那么如何正确去除呢?让我们来了解一下。

河北彩涂镀锌板价格表

一。如果彩涂镀锌钢板胶的接触面积不大,可以直接用拉丝胶擦掉,但要记得用较清洁的橡胶,不要用脏的或粘的,会弄脏表面材料的橡胶。
2。对于被彩涂镀锌钢板污染的大面积区域,使用橡皮擦需要很长时间,而且可能不干净。这时,你可以拿一条干净的毛巾,也不能用那条容易脱毛的毛巾,用汽油或酒精蘸擦,这样就容易脱毛了。
三。没有汽油或酒精,其实还有另外一种方法,但这种麻烦是用温水或热水反复擦洗,待涂有颜色的镀锌板胶变软后再用肥皂清洗。这种方法浪费间,所以不推荐,但如果没有酒精或汽油这样的物质。这是唯一的使用方法。事实上,擦洗会更干净。
四。二是使用沥青、焦油等清洁剂。有很多洗衣店都有这种清洁剂。

通过以上介绍,我们可以在以后出现自粘清洗的情况时使用上述方法。相信您能摆脱以上方法,保持产品表面的清洁。欢迎您有什么好办法给我们打电话

.Te color coated galvanized sheet is easy to be stained with adhesive due to improper operation in the construction process, which is caused by the carelessness of workers. First, it is not beautiful, and second, it affects the normal adhesion, so we need some methods to remove it, so how to remove it correctly? Let's learn about it.
1. If the contact area of color coated galvanized steel sheet adhesive is not large, it can be wiped off directly with drawing rubber, but remember to use the cleaner rubber, not the one that will be dirty or sticky, which will stain the surface material.
2. For the large area polluted by the color coated galvanized steel plate, it will take a long time to use the eraser, and it may not be clean. At this time, you can take a clean towel, and you can't use the one that is easy to get rid of the hair, dip it ith gasoline or alcohol for scrubbing, so it is easy to get rid of it.
3. Without gasoline or alcohol, there is actually another way, but this kind of trouble is to scrub it repeatedly with warm water or hot water, and then wash it with soap after the color coated galvanized sheet adhesive softens. This method wastes time, so it is not recommended, but if there is no such material as alcohol or gasoline. That's the only way to use it. In fact, it will be cleaner to scrub.
4. The other is to use a kind of cleaning agent such as asphalt and tar. There are many washing shops with this kind of cleaning agent.
Through the above introduction, we can use the above methods when the self-adhesive cleaning situation occurs in the future. I believe that you can get rid of the above methods and keep the cleanliness of the product surface. If you have any good way to call us.

【相关推荐】

咨询热线

400-060-9166