联系我们收藏本站在线留言网站地图欢迎进入唐山天物彩板有限公司官网!

彩板厂家_彩涂板价格_彩涂卷厂家_彩涂板价格_唐山彩涂板厂家

天物彩板-始于2004 专注功能性高端彩板生产销售
服务热线: 400-060-9166
服务热线: 13931586578
彩板厂家

手工净化板PK机制净化板

返回列表 来源: 发布日期: 2020.04.21

手工净化板PK机制净化板

天物彩板专注彩板行业16年——北京压型彩钢板型号及参数请拨打网站上方电话咨询


长度:可根据设备现场便于施工等实践需求确定(一般≤8000mm)
宽度:规范板: 980mm、1180mm非规范板恣意
厚度一般为:50mm、75mm、100mm
分类
按夹芯材料分:
1. 岩棉手工板
2. 玻镁岩棉手工板
3. 纸(铝)蜂窝手工板
4. 聚氨酯(PU)手工板
5. 珍珠岩手艺板
6、其它特别芯材手工板
按衔接方法分:
1、中字型(盒子式)手工板
2、中字企口型手工板
3、企口型手工板
产品特性
1、使用规划广
产品使用于电子、食物、医药、医院等企业界的洁净室无尘室的大面积吊顶围护。
2、理化功能好
产品板面为锌涂层、聚酯涂层、氟碳涂层或不锈钢板,故耐腐蚀性特好;产品内填材料均系A级难燃材料,焚烧时不会熔融,也无高温分解滴落物,是目前国内高等级的防火修建饰复合板材,产品强度高、耐冲击、抗震性好。
3、施工设备便当
产品是全手工生产,可按顾客工程要求定长定宽出产,组合设备,不仅能很多减少修建物的根底工程和构造工程费用,且能屡次拆装,施工设备便当,综合效益非常显着。
机制净化板芯材VS手工净化板对比
一、机制净化板芯材VS手工净化板芯材
机制净化板芯材:岩棉、泡沫、挤塑板、玻璃丝棉、硅岩板、纸蜂窝、聚氨酯等。
手工净化板芯材:岩棉、泡沫、挤塑板、玻璃丝棉、硅岩板、纸蜂窝、铝蜂窝、玻镁网格等。
二、机制净化板搭接方式VS手工净化板搭接方式
机制净化板:企口板
手工净化板:盒子板、企口板、三母一公板
三、机制净化板宽度VS手工净化板宽度
机制净化板:950 1150
手工净化板:*大宽度达到1180,其他宽度可随意定制。
四、机制净化板厚度VS手工净化板厚度
机制净化板:50 75 100 150
五、机制净化板VS手工净化板性能对比
1.板型:机制净化板板型单一,手工板有8、9种不同板型可满足不同工程的需求。
2.芯材:手工净化板里面可填充各种芯材。
3.外观:手工净化板的外观比机制净化板的外观精细。
4.强度:机制净化板存在强度比较差,手工净化板强度较高,采用手工制作,内部加龙骨,强度比普通机制板大。
5.防火:随着消防要求的不断提高机制板已很难满足工程需求,市场逐渐退化,取而代之的是可达到相应耐火极限的手工板。
6.价格:机制净化板由于是机器生产所以价格不是很高,手工净化板价格相对较高。因采用手工制作,较机制板工艺复杂,加工速度慢,所以成本较高。

ate specification

Length: it can be determined according to the practical requirements such as the convenience of construction on the equipment site (generally ≤ 8000mm)
Width: Standard Board: 980mm, 1180mm non-standard board arbitrary
Thickness: 50mm, 75mm, 100mm
classification
According to the sandwich material:
1. Rock wool handmade board
2. Glass magnesium rock wool handmade board
3. Paper (aluminum) honeycomb manual board
4. Polyurethane (PU) handmade board
5. Perlite Technology Board
6. Other special core material handmade board
According to the connection method:
1. Chinse type (box type) handmade board
2. Chinese tongue and groove hand-made board
3. Notched handmade board
Product characteristics
1. Wide use plan
Products used in electronics, food, medicine, hospitals and other enterprises clean room dust-free room large area ceiling enclosure.
2. Good physical and chemical function
The surface of the product is zinc coating, polyester coating, fluorocarbon coating or stainless steel plate, so the corrosion resistance is very good; the filling materials of the product are all class a flame-retardant materials, which will not melt when burned, and there is no high-temperature decomposition drop. It is currently a high-grade fire-resistant building decoration composite plate in China, with high strength, impact resistance and seismic resistance.
3. Convenient construction equipment
The products are all hand-made. They can be produced with fixed length and width according to the customer's engineering requirements. The combination of equipment can not only reduce the cost of the foundation engineering and structural engineering of the building, but also can be disassembled and disassembled repeatedly. The construction equipment is convenient and the comprehensive benefit is very significant.
Comparison of core material of mechanical purification board vs manual purification board
1、 Mechanical purification board core vs manual purification board core
Mechanism purification plate core material: rock wool, foam, extruded plate, glass wool cotton, silicon rock plate, paper honeycomb, polyurethane and so on.
Hand cleaned core material: rock wool, foam, extruded plate, glass wool cotton, silicon rock plate, paper honeycomb, aluminum honeycomb, glass magnesium mesh, etc.
2、 Lapping mode of mechanical purification plate vs manual purification plate
Mechanism purification board: Enterprise Board
Manual purification board: box board, Qikou board, three female and one male board
3、 Width of mechanical purification plate vs width of manual purification plate
Mechanism purification board: 950 1150
Manual purification board: * large width up to 1180, other width can be customized at will.
4、 Thickness of mechanical purification plate vs thickness of manual purification plate
Mechanism purification board: 50 75 100 150
5、 Performance comparison between mechanical purification board and manual purification board
1. Plate type: the plate type of mechanical purification plate is single, and there are 8 or 9 different plate types of manual plate to meet the needs of different projects.
2. Core material: manual purification plate can be filled with various core materials.
3. Appearance: the appearance of manual purification board is finer than that of mechanical purification board.
4. Strength: the strength of the mechanical purification board is relatively poor, and the strength of the manual purification board is higher, which is made by hand, with keel inside, and the strength is greater than that of the ordinary mechanical board.
5. Fire protection: with the continuous improvement of fire protection requirements, it is difficult to meet the engineering needs of the machine-made board, and the market gradually degenerates. Instead, it is the manual board that can reach the corresponding fire resistance limit.
6. Price: the price of machine-made purification board is not very high because it is produced by machine, and the price of manual purification board is relatively high. Due to the manual production, the process is more complex than that of the machine-made plate, and the processing speed is slow, so the cost is higher.
【相关推荐】

咨询热线

400-060-9166