Now, people who have used Shandong color coated board know that it has many advantages: fire prevention, sound insulation, heat preservation, etc. when using, workers will splice and paste the color coated board, which has a long service life. Sometimes,
the color coated board will fall off due to the use of the environment or improper manual operation during construction. If only a small area falls off, it should be timely Repair to avoid greater loss, or large area of falling off will become
very troublesome, so we need to check regularly to prevent falling off, so how to prevent it?
First of all, the material selection and control of the thermal insulation system should be done well. The quality of polymeric mortar, printed color coating plate, anchor bolt and other materials in the thermal insulation system of the building exterior
wall should be checked. The proportion of glue adhesives should be scientific and the quality of the thermal insulation plate should be qualified.
Secondly, the design of wall insulation should be reasonable. Wall insulation is a systematic project. The matching accessories of each structural layer should be considered in the design. For materials with poor adhesion or low strength, anchor bolts
should be designed to strengthen and improve connectivity.
Third, strengthen the construction quality of the color coated board. Construction is the weak link of the quality control of the building wall insulation project. Before construction, it is necessary to do a good job in the inspection and acceptance
of the base wall before continuing the construction, so as to ensure that the bonding strength of the base meets the specification requirements, and the flatness of the wall is also very important to be within the controllable range.
The above three points are about how to prevent the fall off of color coated plate. I hope you can pay attention to the harm brought by the fall off phenomenon. It not only makes the overall construction quality threatened, but also brings hidden danger
to people's personal safety. Once the fall off phenomenon is found, you should immediately find a professional to repair it, in order to prevent the butterfly effect caused by the problem, which affects the use It will also affect the construction
progress of the whole project.