联系我们收藏本站在线留言网站地图欢迎进入唐山天物彩板有限公司官网!

彩板厂家_彩涂板价格_彩涂卷厂家_彩涂板价格_唐山彩涂板厂家

天物彩板-始于2004 专注功能性高端彩板生产销售
服务热线: 400-060-9166
服务热线: 13931586578
彩板厂家

彩钢厂房降温有诀窍

返回列表 来源: 发布日期: 2020.11.11

彩钢厂房降温有诀窍

临近夏天,彩钢厂房里的工人抱怨说室内温度高于室外温度。许多客户来咨询我们,寻求降低工厂温度的解决方案。为了解决这一问题,我们需要找出影响车间温度的关键因素,然后选择合适的方法进行处理,从而达到良好的室内环境和高的性价比。冷却方法一般如下:
1、 设备绝缘和冷却


植物保温可以隔离大部分的彩钢厂房太阳辐射和热传导,减少室内温室效应,从而大大降低植物的温度,改善植物的环境。常用的方法有两种:用保温棉覆盖屋面,在屋面板上喷涂高效隔热反光涂料。
2、 彩钢厂房车间通风降温
保证彩钢厂房车间通风合理,安装适当的通风系统。合理的排气系统安装将显著改善车间空气环境,大大降低车间温度。
3、 车间强制冷却
强制冷却是指在厂房屋顶安装空冷器。空气冷却器是一种利用水冷原理来冷却空气的机器,强制排气风扇将冷空气输送到室内。可使车间室内温度保持在26-30℃的舒适温度。其耗电量相当于空调的1/8,成本是空调的1/2。这是车间强制冷却的好方法。


Near summer, workers in the factory complain that the indoor temperature is higher than the outdoor temperature. Many customers come to consult us and seek solutions to reduce the temperature in the factory. In order to solve the problem, we need to find the key factors that affect the temperature of the workshop, and then choose the appropriate method to deal with it, so as to achieve a good indoor environment and the highest cost performance ratio. Cooling methods are generally as follows:

1、 Plant insulation and cooling
Plant insulation can isolate most of the solar radiation and heat conduction, reduce indoor greenhouse effect, thus greatly reducing the temperature of the plant and improving the environment of the plant. There are two common methods: covering the roof with insulation cotton and spraying high-efficiency heat insulation reflective coating on the roof panel.
2、 Ventilation and cooling of workshop
Ensure the reasonable ventilation of the workshop and install appropriate ventilation system. Reasonable exhaust system installation will significantly improve the air environment of the workshop and greatly reduce the temperature of the workshop.
3、 Forced cooling of workshop
Forced cooling refers to the installation of air cooler on the roof of the factory building. The air cooler is a machine that uses the principle of water cooling to cool the air, and the forced exhaust fan delivers the cold air to the room. It can keep the indoor temperature of the workshop at a comfortable temperature of 26-30 ℃. Its power consumption is equivalent to 1 / 8 of the air conditioning, and the cost is 1 / 2 of the air conditioning. It is a good method of forced cooling in the workshop.

咨询热线

400-060-9166