We often see the use of colored steel tile in the building. Its color is changeable, which infuses fresh color into the building. Of course, in addition to its appearance, its cost performance is relatively high, but some users think that it is not easy
to master the measurement when it is laid and used with special nails. Then we will learn about the laying of the product and the use of special nails in view of this problem To your attention.
1、 Correct laying method:
1. For the roof with length less than 15 meters, use overlapping type to lay color steel tile;
2. For roofs longer than 15m, staggered laying shall be used.
2、 Usage of special nails.
1. The special nails must be driven from the lower end of the color steel tile to the roof to ensure the beauty, sealing and tidiness.
2. The special nail must be hit in the middle of the tile bone to play its waterproof role.
3. The fixed interval of special nails shall be controlled from 0.5 to 1 m horizontally and vertically.
Through the above analysis, when using color steel tile, we should pay attention to its laying and use of special nails, so that the material can play a stable performance, and not make it look bad. In this small edition, we suggest that you should see whether there are cracks on the surface of the plate before use. If you don't check the problems in the use process, it will affect us Work progress.