联系我们收藏本站在线留言网站地图欢迎进入唐山天物彩板有限公司官网!

彩板厂家_彩涂板价格_彩涂卷厂家_彩涂板价格_唐山彩涂板厂家

天物彩板-始于2004 专注功能性高端彩板生产销售
服务热线: 400-060-9166
服务热线: 13931586578
彩板厂家

彩涂板的水洗流程

返回列表 来源: 发布日期: 2020.09.16

彩涂板的水洗流程

彩涂板的生产中,需要经过一个步骤,叫做水洗。进行孔隙率或孔隙率检查的主要目的是为了保证后续产品的孔隙率,同时也能防止其出现缺陷。
彩涂板的生产碱蚀后,彩涂板表面会产生大量的碱蚀槽液膜。在工业生产中,碱蚀后的水洗称为水洗,而碱蚀后的彩涂板较难清洗。首先,要保证产品清洗工艺的准确性。对于第一个水箱,要保持适当的水温和碱度,所以不需要换水。目的是保证第一槽的水质适宜,能保持良好的清洗效果,并且在清洗过程中可以进行适当的搅拌,并且经过多次的工作可以根据工作量来判断,减少水的浪费。
彩涂板的生产由于彩涂板应用广泛,在生产过程中必须保证工艺流程是否符合要求,否则后续使用会出现很多问题,逐渐失去使用价值。

In the production of color coated board, it is necessary to go through a step, called water washing. Its main purpose is to ensure that the product can be more beautiful, and at the same time, it can also check whether there are problems of porosity or porosity defects, in order to prevent the subsequent use of difficulties, so it is necessary to carry out this step.

After alkali erosion, there will be a large amount of alkali etched tank liquid film on the surface of color coated plate. In industrial production, it is called water washing after alkali etching, and the color coated plate after alkali erosion is relatively difficult to clean. Firstly, it is necessary to ensure the accuracy of the product cleaning technology. For the first water tank, it is necessary to maintain the appropriate water temperature and alkalinity, so there is no need to change water. The purpose is to make sure that the water quality of the first tank is appropriate It can maintain a good cleaning effect, and in the process of cleaning can carry out appropriate stirring, and after many times of work can be judged according to the workload, reduce the waste of water.
Because the color coated plate is widely used, it is necessary to ensure whether the technical process meets the requirements in the production process, otherwise the subsequent use will have a lot of problems and gradually lose the value of use.

咨询热线

400-060-9166