联系我们收藏本站在线留言网站地图欢迎进入唐山天物彩板有限公司官网!

彩板厂家_彩涂板价格_彩涂卷厂家_彩涂板价格_唐山彩涂板厂家

天物彩板-始于2004 专注功能性高端彩板生产销售
服务热线: 400-060-9166
服务热线: 13931586578
彩板厂家

彩涂板加工制作的工艺程序​

返回列表 来源: 发布日期: 2019.08.06

彩涂板加工制作的工艺程序

天物彩板全国配送——济南彩涂板生产厂家_济南彩涂板多少钱一平米_天物彩板

济南彩涂板生产厂家_济南彩涂板多少钱一平米_天物彩板

1。建筑设计院提供的设计图纸不能直接用于彩涂板的加工,但应在考虑公差匹配、加工余量、焊接控制等加工工艺后,在原设计图纸的基础上绘制。l和其他因素。加工图是设计人员与施工人员之间的最终沟通。它起着制作精要书的作用。它也是对实际尺寸、标记、剪切、槽加工、冲压、弯曲、装配、焊接、喷漆、产品检验、堆放、发送等操作的说明。它还具有较高的管理水平。清单的作用。

2。加工制造前施工条件分析
图纸加工图或审查设计图应在审查时分析施工条件或难度。必须仔细分析焊接的难点,是否使用高强度螺栓和紧固件,是否在狭窄的地方保持电极的焊接角度。
三.钢卷尺?在彩钢板工程中,胶带、宽带钢胶带和凸型钢胶带主要应用于任何一个一流的产品中。最好是使工厂胶带和现场胶带属于同一种产品,即在不同类型的工作之间使用“同一把尺”。如果有困难,10米之间的差距控制在0.5毫米以内。
4。对在岗操作人员进行培训和考核,对特殊工种进行合格评定,全面完成各工序的技术报批。
(1)放样

放样是根据彩钢板产品施工详图或零件图要求的形状和尺寸,在放样台或平板上绘制产品或零件的实体形状,并在其上绘制产品或零件的实体形状的过程。放样台或平板按1:1的比例,以得到实际长度并制作模板。对于更复杂的壳体零件,需要进行拉伸和展开。

1. The design drawings provided by the architectural design institute can not be directly used to process the color steel plate, but should be drawn on the basis of the original design drawing after considering the processing technology, such as tolerance matching, processing allowance, welding control and other factors. Processing drawing is the ultimate communication between the designer and the builder's intention. It plays the role of making the essentials book. It is also the instructions for actual size, marking, shearing, groove processing, punching, bending, assembling, welding, painting, product inspection, stacking, sending and other operations. It also plays a high level of management. The role of checklists.
2. Analysis of Construction Conditions before Processing and Manufacturing
Drawing processing drawings or reviewing design drawings should analyze construction conditions or degree of difficulty while examining them. It is necessary to carefully analyze the difficult parts of welding, whether to use high-strength bolts and fasteners, and whether to maintain the welding angle of electrodes in narrow places
3. Steel tape? In color steel sheet engineering, tape, broadband steel tape and convex steel tape are mainly used in any one of the first-class products. It is better to make the factory tape and the field tape belong to the same kind of products, that is, to use "the same ruler" between different types of work. If there are difficulties, the difference between 10m is controlled within 0.5mm.
4. On-the-job operators should be trained and assessed, special types of work should be qualified, and the technical submission of various processes should be fully completed.
(1) Lofting
Lofting is the process of drawing the solid shape of the product or parts on the lofting table or flat plate according to the shape and size required by the detailed construction drawings or parts drawings of the colored steel plate products, and drawing the solid shape of the products or parts on the lofting table or flat plate according to the ratio of 1:1, so as to obtain the real length and make the template. For more complex shell parts, it is necessary to draw and expand.

【相关推荐】

咨询热线

400-060-9166