彩涂板如何有效防潮

天物彩板专注彩板行业16年——彩板规格和厚度是多少_压型彩钢板型号及参数请拨打网站上方电话咨询

在使用过程中注意彩涂板的正确安装和使用，防止彩涂板因操作不当而受温度影响，产生受潮的情况。我们应该特别注意这一点。板材一旦受潮，将影响其使用，后续工程进度无法保证。这里有一个详细的描述介绍如何有效地防止水分。

一。防潮。建筑外墙虽然采用彩涂板，但除玄武岩外，还有其他易受潮的材料。因此，雨天施工时不要使用岩棉。
2。温度。岩棉板虽然是保温材料，但作为甲级不燃材料，也有过负荷时间。因此，岩棉接触温度不宜过高。岩棉温度达到200℃以上时，应进行外部保护。同时，在安装过程中，要严格执行安装标准，绝缘钉间距应在400mm左右。防止湿气过热。
三。安装基座。在安装彩涂板时，一般来说，为了达到散热量小的目标。在安装设计中，岩棉与毛毡必须紧密连接，防止过多的热量损失，产生热量水分。
通过以上介绍，我们可以了解到只有这样才能有效地防止彩涂板受潮。在储存和使用过程中要注意方法的正确控制。为了防止受潮现象的发生，我们应该在正常工作中做好维护和修理工作，并及时处理受潮情况，尽量减少损失。

Pay attention to the correct installation and use of the color coated plate in the process of use, in order to prevent the plate from being affected by the temperature due to improper operation, so as to produce the situation of damp. We should pay special attention to this point. Once the plate is damp, its use will be affected, and the subsequent project progress cannot be guaranteed. Here is a detailed description Introduce how to prevent moisture effectively.

1. Dampproof. Although the color coated board is used for the exterior wall of buildings, there are other materials that are easy to be affected with damp besides basalt. Therefore, do not use rock wool for construction in rainy days.
2. Temperature. Although rock wool board is thermal insulation material, as a class a non combustible material, it also has overload time. Therefore, the temperature of rock wool contact should not be too high. Once the temperature of rock wool reaches more than 200 ℃, rock wool shall be protected externally. At the same time, during the installation, it is necessary to strictly follow the installation standards, and the spacing of insulation nails should be about 400mm. Prevent moisture from overheating.
3. Install the docking. When installing the color coated plate, generally speaking, in order to achieve the small target of heat loss. In the installation design, rock wool and felt must be closely connected to prevent excessive heat loss, resulting in heat and moisture.
Through the above introduction, we can learn that only by doing these can we effectively prevent the color coating board from being wet. We should pay attention to the correct control of methods in the process of storage and use. In order to prevent the occurrence of damp phenomenon, we should do a good job of maintenance and repair in normal work, and deal with the damp situation in time, Try to minimize the loss.