联系我们收藏本站在线留言网站地图欢迎进入唐山天物彩板有限公司官网!

彩板厂家_彩涂板价格_彩涂卷厂家_彩涂板价格_唐山彩涂板厂家

天物彩板-始于2004 专注功能性高端彩板生产销售
服务热线: 400-060-9166
服务热线: 13931586578
彩板厂家

分析彩钢瓦发生的倾斜原因是什么

返回列表 来源: 发布日期: 2020.08.04

分析彩钢瓦发生的倾斜原因是什么

彩钢瓦施工过程中,不仅要求施工人员有良好的工艺,而且设备也要有保障。但有时你会发现彩钢瓦是倾斜的。影响彩钢瓦倾斜度的因素有哪些?让我们看看下面的原因

1彩钢瓦根据温差:温度变化会使彩钢瓦产生较大的变形,特别是在夏季。在阳光照射下,钢柱向太阳的膨胀量较大,因此钢柱向背对着太阳的一侧倾斜。
2 彩钢瓦安装误差:是由于安装过程中碰撞和彩钢瓦本身几何尺寸偏差造成的。也包括测量人员在校准过程中的误差。
三。 彩钢瓦电缆风绳松紧不当:严禁用风绳改变彩钢瓦的垂直偏差值。
4焊接变形:焊接后,焊缝收缩变形对彩钢瓦的垂直度影响很大。由于本工程焊缝较厚,累积误差的影响较大。
随着工业的快速发展,越来越多的地方使用彩钢瓦。为了保证彩钢瓦更利于大家的工作,施工时要注意其角度,防止倾斜。

During the construction of color steel tile, not only the construction personnel are required to have good technology, but also the equipment must be guaranteed. But sometimes you will find that the color steel tile is inclined. What factors affect the inclination of the color steel tile? Let's look at the reasons below

1. According to temperature difference: temperature change will make color steel tile produce large deformation, especially in summer. Under the sunlight, the amount of expansion towards the sun is large, so the steel column inclines to the side with the back to the sun.
2. Installation error: it is caused by collision during installation and geometric dimension deviation of color steel tile itself. It also includes the error of easurement personnel during calibration.
3. Improper tightness of cable wind rope: it is strictly forbidden to use the wind rope to change the vertical deviation value of color steel tile.
4. Welding deformation: after welding, the welding seam shrinkage deformation has a great influence on the verticality of color steel tile. Because the welding seam of the project is thick, the influence of accumulated error is relatively large.
With the rapid development of industry, more and more places use color steel tile. In order to ensure that color steel tile is more conducive to everyone's work, it is necessary to pay attention to its angle during construction to prevent inclination.

咨询热线

400-060-9166