河北任丘清除彩涂板上的不干胶

天物彩板专注彩板行业16年——清除彩涂板上的不干胶_河北任丘彩钢卷请拨打网站上方电话咨询

彩涂板不干胶所接触的面积如果不是很大的，可以直接用绘图橡皮就可以擦掉了，但是记住一定要用那种比较干净的橡皮，不能用那种一擦就脏的还很粘的那种，那样的会弄脏表面材质的。

2、彩涂板所污染到的面积比较大的那种，用橡皮擦会比较久，而且还有可能擦不干净，这时就可以拿块干净的毛巾，不能使用那种容易掉毛的，沾点汽油或者酒精来进行擦洗，这样很容易就会擦洗掉了。
　　3、不用汽油或者酒精的话，其实还有一种方法的，不过这种的比较麻烦，就是直接用温水或者热水在上面反复的擦洗，等到彩涂镀锌板不干胶软化了以后再用肥皂清洗，这方法浪费时间，所以不是很推荐，不过如果没有酒精、汽油这样的材料。那也就只有用这个了，这样擦洗其实会更加的干净。
　　4、还有一种就是用那种沥青、焦油这样的清洗剂，这种清洗剂洗车店有很多。

If the contact area of the self-adhesive on the color coated board is not very large, you can directly use the drawing rubber to erase it. But remember to use the cleaner rubber, not the one that is dirty and sticky after wiping, which will stain the surface material.

2. If the area of the color coated board is relatively large, it will take a long time to use an eraser, and it may not be cleaned. At this time, you can take a clean towel. You can not use the one that is easy to lose hair and dip it with gasoline or alcohol for scrubbing. In this way, it will be easily wiped off.
3. If you don't use gasoline or alcohol, there is actually another way. However, this kind of problem is to directly use warm water or hot water to repeatedly scrub it, and then wash it with soap after the self-adhesive of color coated galvanized sheet softens. This method wastes time, so it is not recommended. However, if there is no alcohol or gasoline materials. That's the only way to use this one. In fact, it will be cleaner.
4. There is also a kind of cleaning agent such as asphalt and tar. There are many car washing shops with this kind of cleaning agent.