Patterned aluminum plate is a very large amount of metal, many users and dealers will store some in stock, ready to use at any time, convenient for customers to pick up at any time. The patterned aluminum plate is a kind of metal with active properties. If it is not stored properly, there will be deformation, discoloration, corrosion and other accidents, which will affect the normal use.Handling of patterned aluminum plate: during handling, pay attention to the protection of edges and corners, and place the patterned aluminum plate obliquely. The inclination angle shall not exceed 10 degrees, and the floor shall be padded with wood or thick plywood. When handling, both ends should be lifted at the same time, do not push or pull, so as not to damage the surface oxide film or coating. The working surface shall be flat without hard objects and shall not damage the surface of patterned aluminum plate. The ideal place to park the patterned aluminum plate is in a flat site. It should be stacked face to face in the process of transportation. It is forbidden to carry it by one person. It should be handled with care in the process of transportation. The surface damage caused by collision should be strictly prevented, and the surface of the plate should be scratched due to excessive bending of the plate body.
China has a vast territory, and the temperature difference is obvious. After users get the patterned aluminum plate, they must not rush to open the package. First, put the patterned aluminum plate in a well ventilated place for 3 days to balance the temperature difference between the inside and outside of the patterned aluminum plate, and then open the package for use. This can ensure that the patterned aluminum plate will not generate water vapor due to too large temperature difference, and ensure the quality of patterned aluminum plate is qualified.