Printed color steel plates are generally used in buildings, but they can not be used directly after the laying. Today, let's take a look at the follow-up work after the laying.
1. In the follow-up, it is first necessary to lay the thermal insulation cotton. Before laying, it is necessary to check whether the thickness of the thermal insulation cotton is relatively uniform, and check whether the warranty and certificate meet
the design requirements. Moreover, when laying insulation cotton, it is also necessary to ensure more tight laying, and there should be no gap between insulation cotton, and it needs to be fixed in a more timely manner.
2. The next step is the laying
of the roof. Each edge needs to be overlapped in strict accordance with the requirements of the specification, and the installation position at the cornice also needs to be determined by combining the printed color steel plate and glass wool, and then
it needs to be laid from the cornice position from top to bottom, And it is necessary to check the flatness of both ends and the flatness of the plate.
3. The soft waterproofing at the ridge, gutter and other positions generally needs to be paved
with waterproof coiled plates, so it can better solve the problem of ponding and leakage of color plates. And the fixing point should be fixed on the peak of the profiled plate, so as to ensure that the stress of the fixing part is reasonable and the
waterproof structure is reasonable.
4. During the installation control of profiled steel plate, the installation of profiled metal plate should also be flat and straight, and there should be no construction residues and dirt on the plate surface.