联系我们收藏本站在线留言网站地图欢迎进入唐山天物彩板有限公司官网!

彩板厂家_彩涂板价格_彩涂卷厂家_彩涂板价格_唐山彩涂板厂家

天物彩板-始于2004 专注功能性高端彩板生产销售
服务热线: 400-060-9166
服务热线: 13931586578
彩板厂家

彩涂板用涂料大致有以下一些

返回列表 来源: 发布日期: 2020.05.25

彩涂板用涂料大致有以下一些

3厚彩钢板一平米多少钱_汕头彩涂卷厂家_天物彩板

天物彩板专注彩板行业16年——3厚彩钢板一平米多少钱_汕头彩涂卷厂家请拨打网站上方电话咨询

一。底漆:环氧底漆(氨基交联型、聚氨酯交联型、环氧磷酸盐型);改性环氧底漆(聚氨酯改性、聚酯改性、聚酰胺改性等);聚酯底漆(氨基交联型、聚氨酯交联型);水性底漆(水性电泳漆,丙烯酸乳液底漆)。
2。背漆环氧型(同环氧底漆);聚酯型(氨基聚酯,环氧改性聚酯);氨基醇酸型;聚氨酯型。
三。面漆乙烯辊面漆;塑溶胶和有机溶胶(PVC);聚酯(氨基类型:柔性0-1t,刚性2-3T;聚氨酯类型:TDI和HDI);硅改性聚酯(热拼接:硅含量25%-50%;冷拼接:硅含量小于30%);丙烯酸(热固性,溶剂型:烷基化甲氧基丙烯酸酯-胺共聚物树,无底漆的预处理铝表面采用油脂自交联涂料,以水和氨基树脂为交联剂的水性丙烯酸涂料,可焊型(使用锌粉,或使用铬酸,锌粉等化学结晶物可在不含树脂的情况下烘干油漆,或以线型环氧树脂为基材,用大量细小锌粉颗粒焊接富锌涂料;氟碳树脂(主要类型是以聚偏氟乙烯树脂为主的分散型涂料)。其氟碳树脂含量至少占树脂总含量的70%,固体含量至少占固体总含量的40%,其他组分为丙烯酸树脂。

1. Primer: epoxy primer (amino crosslinking type, polyurethane crosslinking type, epoxy phosphate type); modified epoxy primer (polyurethane modification, polyester modification, polyamide modification, etc.); polyester primer (amino crosslinking type, polyurethane crosslinking type); water-based primer (water-based electrophoretic paint, acrylic emulsion primer).

2. Back paint epoxy type (same as epoxy primer); polyester type (amino polyester, epoxy modified polyester); amino alkyd type; polyurethane type.
3. Topcoat Vinyl roll top coating; plastisol and organosol (PVC); polyester (amino type: flexible 0-1t and rigid 2-3T; polyurethane type: TDI and HDI); silicon modified polyester (hot splicing: silicone content 25% - 50%; cold splicing: silicone content less than 30%); acrylic acid (thermosetting, solvent type: alkylated Methoxyacrylate amine copolymer tree The self crosslinking coating made of grease is used on the pretreated aluminum without primer; the water-based acrylic coating with water and amino resin as crosslinking agent; the weldable type (using zinc powder, or using chromic acid, zinc powder and other chemical crystals to dry paint without resin, or using linear epoxy resin as base material to weld zinc rich coating with a large number of fine particles of zinc powder); fluorocarbon tree Lipids (the main type is a dispersion type coating mainly made of polyvinylidene fluoride resin. Its fluorocarbon resin content accounts for at least 70% of the total resin content, its solid content accounts for at least 40% of the total solid content, and other components are acrylic resin.

咨询热线

400-060-9166