The light steel combined room has the following characteristics:
1. the color steel plate movable room is of seismic grade 7 and wind resistance Grade 8;
2. the design of the second floor can bear the dynamic load of 150kg/ m2;
3. the service life of the movable board room is more than ten years.
4. the fire protection grade of this product is Grade A.
The board of the movable room is stated as follows: EPS insulated sandwich board, poly * * Vinyl Color steel sandwich board, rock wool color steel sandwich board, glass wool sandwich color
steel plate and plastic steel plate.
1) EPS heat insulation sandwich board: it is a super light building plate which is made of color coated steel plate as surface material, self extinguishing * * ene as core material, and is made of heat curing
adhesive and pressure composite by heating and pressing in the continuous forming machine. It has self lightening (1 / 20-1 / 30 of the concrete roof), and heat insulation (its thermal conductivity value is 0.034w/mk). The construction rate is fast (the
features of no wet operation and no secondary decoration are a new type of envelope material integrating the replacement, heat preservation, waterproof and decoration)
2) Polychromatic steel sandwich board: Class B fire protection, corrosion prevention,
rust prevention and weather resistance
3) Rock wool color steel sandwich board: class a fire protection, heat insulation, sound insulation, fire protection and other properties
4) Glass wool color steel sandwich board: class a fire protection,
compared with rock wool board, the plate is simple and can be used with roof
5) Plastic steel plate: elegant appearance, long service life, class a fire protection
Types and techniques of the activity room
Types: light steel combined
room, color steel plate room, elegant activity room, container room, steel structure factory room, color steel shed, etc.
Technology two: there are three examples of single slope type, double slope type and four slope type, with the number of layers
Area acounting idea
1. The area of slab room is calculated and compared by the width of the outer wall edge by the number of layers.
2. Outdoor stairs and walkways are calculated according to the sum of projected area of natural
layer. 3. The canopy is calculated by half of the horizontal projection area.
4. No account shall be given to the area of construction for the slab extending out of the wall.
5. The total area = (1) + (2) + (3).
6. There are two stairs on the standard floor. You can get one of the walls. When you increase or decrease the stairs by 4.5m2, you can add or decrease the stairs according to this number.
as noted, the bill of quantities calculation shall be adjusted and settled according to the above calculation formula.