山西彩钢复合板胶水使用滴胶管需要注意这些

彩钢复合板软管有多种类型，不同的材料和不同的环境。实际上，水龙带的使用时间除了与质量有关外，还与许多因素有关。比如在维修和使用条件下，即使它的质量很好，但使用时不加照顾，也会缩短使用寿命，下面是使用彩钢复合板的橡胶滴管。

There are many types of hose, different materials, and different environments. In fact, the use time of drop hose is related to many factors besides its quality. For example, maintenance and use conditions, even if its quality is very good, but the use of no care, will also reduce the service life, the following is the use of color steel composite plate rubber drop hose.

First, the length of the hose is very important, because it is related to the pressure it bears and can not exceed the pressure range. If you can't use it to transport materials that can't be transported, its service life will be affected. The length of the hose must be used correctly and should not exced this length range.
Second, the temperature of the medium it carries is also required. It should not be lower than 40 ℃ or higher than 120 ℃. Otherwise, it will damage the hose and reduce its service life. Its minimum bending radius can't be smaller than this range. If it is smaller, it can't be used. It can't bend at the joint. Otherwise, the hydraulic transmission is not smooth and the materials can't be transported smoothly.
Third, don't use the water drop hose of color steel composite board under the condition of torsion. When handling, you should be careful to avoid piercing it. Do not drag on the rough interface. You can't bend or flatten it. Regular cleaning should be carried out to avoid blockage of sundries. Especially in some key places, it is necessary to clean them frequently to prevent impurities from entering into them, hindering the smooth flow of liquid and damaging the equipment